Replacing uPVC Window Handles
Changing upvc window handles is a fairly straightforward task. It is essential to ensure that the new handle fits into the spindle cutouts in the window mechanism.
If the steps listed below are followed properly, any cockspur handle should fit most windows. The step height of the handle is important.
What to Look For
As time passes, uPVC handles on many windows in the UK may begin to show signs of wear and tear. The handle on the window can become loose or difficult-to-operate when this happens. Anyone who is proficient working with basic hand tools can accomplish this fairly simple job.
The first step is to make sure that the handle is securely fixed to the window frame and in the open position. The next step is to find the fixing pins or screws that keep the handle in position. They are usually on the inside of the handle. They can be removed using an screwdriver or pliers.
Once the handle is loose and sagging, it can be removed from its hinges by gently pulling off. Then, you will need to locate a new handle that is the same dimensions and style. This can be accomplished in an online store or in a DIY store. The process should take about five minutes and a screwdriver is all you need.
The most important thing to consider when replacing the uPVC window handle is the step height. This is the distance from the bottom of the handle to where it is placed on the window frame. This is a standard measurement and you should check the height of the step prior to ordering a replacement handle.
Depending on the type of handle you have, there are different sizes to choose from. Inline handles are available for uPVC windows that have centers of 31mm for lugs, while cockspur handles come with lug centres of 43mm. Tilt-and turn handles are typically found on uPVC windows. They have a special design that allows the window to be slid down to let in air and then turned to fully open the window.
The most common breakage in uPVC handles is that they crack internally instead of breaking away from the base section. This makes it difficult to open. It is crucial to make sure that any replacement handle is fitted with the same spindle as your original one.
Remove the Old Handle
A poorly installed or damaged window handles may cause double-glazed windows to open or close improperly and could even result in them becoming stuck. This can be caused by various factors, such as general wear and tear on the handle or corrosion. In these situations, it is vital to replace the upvc window handle as soon as you can to prevent further damage or loss of function.
When replacing www.repairmywindowsanddoors.co.uk on windows made of upvc, you should remove the handles that were previously installed from the window. Begin by removing the screw when the handle in closed position. After you have removed the screw, you can take off the handle. It is a good idea to make use of an electric screwdriver for this as it will make the job easier and faster.
It is also important to note that the screws on the handle could be hidden behind plastic caps, so it is recommended to take an Stanley knife to the screws and remove them. After you have removed the old handle, you'll need to check the square cutout on the base to make sure that the new handle for the window lock is compatible. This is important as you'll need to determine the length of the spindle on the old handle to ensure that it matches the size of the window mechanism and handle spindle that has been cut out.
There are three types of upvc handles: Espag handles with a central screw that can be turned right or left and Cranked handles with two screws and Spade handles that have flat arms and can be used on either side of the upvc window. It is easy to replace the handle after you have found one that is suitable. Simply put it in place and ensure that the spindle is correctly inserted in the lock mechanism. Once that is done, it should be tightened to the window frame and your replacement window handles made of upvc must be secure.
Take a look at the Spindle
If you need to replace a upvc handle that has fallen, it's likely the spindle that holds it in place is damaged or loose. In some instances, it can be fixed by using screws or pins to secure it. In other cases it will need to be replaced entirely. There are a few different kinds of window handles made from upvc. There are three kinds of handles: inline espagnolette cockspur, and tilt-and-turn. Each type has a different method of installing and removing the handle.
It is important to measure the handle before purchasing the replacement. This will ensure that the handle fits the window correctly and be the correct size. Fortunately, all handles adhere to industry standards of sizing making it relatively easy to identify the correct size.
To measure the size of your handle, first, remove it from the window by turning it to an open position. You will then be able to determine the size of the screw or pin that is holding it. Then, use a ruler or tape measure to determine the length of the spindle. Once you know the length of your spindle it is possible to purchase a replacement that is exactly the same length.
When purchasing a replacement you should take into consideration the step height of a window handle made of upvc. The step height is the distance from the base of the handle to where it sits on the frame. Typically, this is approximately 21mm for uPVC windows and 9mm for aluminum. To be sure that the new handle will work, you can drop something into the gap to check the distance it will go before it comes into contact with an obstruction.
Cockspur handles usually have different backset heights depending on the type of window they're installed in. Inline the espag handle heights range from 43mm from centre to center (two fixing points). Cockspur handles have different backsets based on the window they are in. This is due to the fact that they have a spur that extends from the handle and then locks over the cockspur wedge striker plate.
Install the new handle
Once you've selected the new handle, make sure it is aligned with the holes for screws on the door. Then, secure it with the screws provided. If you're replacing the latch lever the lever can be mounted similarly to the door handle. Then, attach the door trim to hide the screws for mounting.
Tips: To take the head of the metal from the wedge of wood make sure the handle is held so that its wider end is resting on the floor. Then use an hammer to tap the thin end of the handle. Be careful not to scratch the handle or handle spindle.